Flyback Recovery Card, Supports multiple snapshot

Key Specifications/Special Features: 1)          Lower hardware cost with the net recovery guard card, seamlessly integrating the network card and recovery card 2)          Support multiple snapshot, the computer can go back to any state of the past time 3)          Driver programs can auto-install , ensuring that the system works in 32-bit mode without in the least affecting system performance 4)          All of net recovery guard settings can be changed at any time with no data loss 5)          Concurrently monitors the contents of hard disk and CMOS 6)          No need to configure various settings or execute commands on each passive workstation 7)          Net copy function empowers one net copy sender to copy its HD data to all of the net copy receiver 8)          Netcopying does not require that the sending side and receiving sides have the same hard disk parameters 9)          Netcopying between non- RTL8139 series network cards is also supported 10)      Multiple channels active workstation enables disparate active workstations to log in to different channels 11)      Remote power on is available for ATX motherboard and network adapter equipped computers 12)      Remote info function provides real-time monitoring passive workstations' hard disk drive 13)      It works with most BIOS types , and requires no modern motherboard or processor 14)      The PC's hard drive partitions can be arranged to allow some or no user storage 15)      Supports NTFS, FAT32, BIGDOS or FAT16 file formats Net recovery guard works with the following operating systems: Windows ME, NT, XP and Server 2003