Offer VSI Crusher, Sand Making Machine

crusher/sand making machine/vertical shaft impact crusher

Application

This vertical shaft impact crusher product is applied widely for the powder process of mineral product including mental and non-metal ore, fireproof material, bauxite, diamond dust, glass raw materials, architectural materials, artificial sand and all kinds of metal ore materials, especially which has more advantages than any other machines in processing the more and most hard materials.

Features and Benefits

◆ Simple structure ,low cost

◆ High efficiency and low consumption

◆ Primary and second crushing capacity

◆ More and most hard materials can be crushed

◆ Cubic shaped final product

◆ Little noise and dust pollution

◆ Convenient performance, maintenance, installation

Working Principle

The Whole PCL vertical shaft impact crusher including feed hopper, classifier, whirl pool cacity, impeller, main bearing assembly base, transmission device and motor etc. Operating principle is as follows: the materials enter the crusher through feeder hopper, which is divided into two parts, one part through the middle of classifier entering into the rotating impeller at high speed, then accelerated, whose speed can reach hundreds of acceleration, then is shot through the tunnels around the impeller by the speed of 60-75 meter/second. First the materials will impact with some materials fallen around classifier, then impact on the whirlpool cavity’s scaleboard together, then will be rebounded and impact on the top of the whirlpool cavity, then changes its direction and goes down, forms continual material layers with the materials shot from the impeller. Therefore some materials will be impacted, crusher, milled twice or more times in the whirlpool cavity, then crushed materials will be excluded through the bottom discharging hole. This can from a closed circulation through the circular classifier system; in general, materials can be crushed into 20 mesh through thrice circulation. Airflow self-circulation in the whirlpool cavity can eliminate the dust pollution well.

Specification

Model:PCL-600

Max. feeding (mm):30

Power(Kw):2x30

Impeller speed (r/min):2000-3000

Output(t/h):12-30

Outer dimension:LxWxH(mm):3000x1500x2050

Weight(T):5.6

Model:PCL-750

Max. feeding (mm):35

Power(Kw):2x45

Impeller speed (r/min):1500-2500

Output(t/h):25-55

Outer dimension:LxWxH(mm):3300x1800x2440

Weight(T):7.3

Model:PCL-900

Max. feeding (mm):40

Power(Kw):2x55

Impeller speed (r/min):1200-2000

Output(t/h):55-100

Outer dimension:LxWxH(mm):3600x2140x2620

Weight(T):12.1

Model:PCL-900B

Max. feeding (mm):40

Power(Kw):2x75

Impeller speed (r/min):1000-1450

Output(t/h):65-130

Outer dimension:LxWxH(mm):3600x2140x2620

Weight(T):13.6

Model:PCL-1050

Max. feeding (mm):45

Power(Kw):2x(90-110)

Impeller speed (r/min):1000-1700

Output(t/h):100-160

Outer dimension:LxWxH(mm):4480x2450x3906

Weight(T):16.9

Model:PCL-1250

Max. feeding (mm):45

Power(Kw):2x(132-180)

Impeller speed (r/min):850-1450

Output(t/h):160-300

Outer dimension:LxWxH(mm):4520x2640x3100

Weight(T):22

Model:PCL-1350

Max. feeding (mm):50

Power(Kw):2x(180-220)

Impeller speed (r/min):800-1193

Output(t/h):200-360

Outer dimension:LxWxH(mm):5340x2940x3650

Weight(T):26

Note: This specification is just reference, any changes are subject to the products.