sell cummins&komatsu marine engine

Marine Transmission System GUIDE TO MODEL SELECTION-MARINE GEARBOX Perform the duties of ahead and astern, engaging and disengaging, reduction of speed as well as bearing the propeller thrust, marine gearbox can be coupled with engine to form the complete power unit for marine purpose. "RATE" in this indicates the proportion of the engine continuous power to the rated speed (HP/RPM). When selecting model, the actual "RATE" should be smaller than the data listed. Gearbox can not be in rigid connection with engine and must be installed in the same rigid supporter with engine. The technical specification should be reconfirmed with signing specific conract. The "Net Weight" listed is approximate. When confirming the gearbox model, please study the "GUIDE OF MODEL SELECTION" carefully or contact us directly. MARINE GEARBOX ADVANCE Model Ratio Rate (HP/rpm) Engine speed (rpm) overall dimension L*W*H (mm) Net Weight (kgs)  6 2.52  3.05 3.5 0.006 1000~2100 350*316*482 58 16A 2.07 2.48 2.95 3.35 3.83 0.016 1000~2000 422*325*563 84 MD020 1.56  1.88 2.63 0.012~0.016 400~4000 281*230*221 15 MA100A 1.6  2.0 2.55  3.11 3.59  3.88 0.0082~0.012 1500~3000 236*390*420 75 MA125A 2.03 2.46 3.04 3.57 4.05 4.39 4.7 0.015~0.027 1500~3000 291*454*485 115 MA142A 1.97 2.52 3.03 3.54 3.95 4.5 5.06 5.47 0.018~0.041 1500~2500 308*520*540 140 40A 2.07 2.96 3.44 0.034~0.04 750~2000 414*610*620 225 MB170 1.97 2.52 3.04 3.54 3.96 4.50 5.06 5.47 5.88 0.037~0.053 1000~2500 485*610*656 240 HC65 1.53 2.03 2.50 2.96 0.06~0.065 1000~2500 311*460*544 130 120C 1.48 1.94 2.45 2.96 3.35  0.109~0.136 1000~2500 352*694*650 225 MV100 1.23 1.62 2.07 2.52 2.87  0.099~0.123 1500~3000 390*630*580 220 135A 2.03 2.59 3.04 3.62 4.11 4.65 5.06 5.47 5.81 0.095~0.135 1000~2000 578*744*830 470 MB242 3.04 3.52 3.95 4.53 5.12 5.56 5.88 0.1~0.14 1000~2500 442*744*763 385 HC138 2.52 3.0 3.57 4.05 4.45 0.15 1000~2500 520*792*760 360 HCD138 5.05  5.63  6.06  6.47 0.126~0.15 1000~2500 494*800*870 415 HC200 1.48 2.0 2.28 0.2 1000~2200 430*744*708 280 MB270A 4.05 4.53 5.12 5.50 5.95 6.39 6.82 0.120~0.20 1000~2500 594*810*868 675 HCQ300 1.06 1.46 2.05 2.38 0.32~0.34 1000~2300 533*681*676 350 300 2.04 2.54 3.0 3.53 4.1 4.61 4.94 5.44 0.17~0.35 1000~2300 638*870*864 740 D300A 4.0 4.48 5.05 5.52 5.90 6.56 7.06 7.63 0.17~0.35 1000~2300 638*920*1040 880 T300 4.95 6.03 6.65 7.04 7.54 8.02 8.47 0.27~0.33 1000~2300 640*920*1110 1120 HCQ401 1.00  1.12  1.50  2.04  2.50 0.4~0.45 1500~2300 640*900*800 480 HC400 2.04 2.50 3.0 3.42 4.06 0.35~0.41 1000~1800 641*890*890 820 HCD400 3.96 4.33 4.43 4.70 5.0 5.53 5.89  0.337~0.41 1000~1800 641*950*988 1100 HCT400A 6.09 6.49 6.93 7.42 7.95 8.40 9.0 9.47 0.33~0.45 1000~2100 784*992*1130 1450 HCT400A-1 8.15 8.69 9.27 9.94 10.60 11.46 12 0.36~0.45 1000~2100 869*1100*1275 1500 HC600A 2.0 2.48 3.0 3.58 3.89 0.49~0.60 1000~2100 745*1094*1126 1300 HCD600A 4.18 4.43 4.70 5.0 5.44 5.71 0.49~0.60 1000~2100 745*1094*1271 1550 HCT600A 6.06 6.49 6.97 7.51 8.04 8.66 9.35 0.35~0.55 1000~2100 805*1094*1271 1600 HCT600A-1 8.23 8.82 9.47 10.8 11.65 12.57 0.41~0.55 1000~2100 878*1224*1346 1700 HCT800 4.95  5.57  5.68  6.43  6.86  7.33  7.84 0.70~0.85 800~1800 1056*1280*1425 2000 900 1.46 2.04 2.47 3.0 3.60 4.08 4.63 4.95 0.55~0.9 600~1600 1115*850*1310 1600 HCT1100 5.60  5.98  6.39  6.85  7.35  7.90 1.00~1.15 700~1600 1150*1350*1547 3000 HC1250 2.03 2.48 3.04 3.48 3.95 1.16~1.25 400~1800 1155*1330*1435 2200