Ceramic Structured Packing

ntroduction: Light strengthened structured corrugated ceramic packing is made up of many packing unit bodies that share the same geometry shape. Corrugated ceramic packing is called Kelapak packing abroad, it is also called high efficiency packing because its separating-efficiency is several times to more than ten times of loose cops packing.Compared with loose cops plate tower packing, corrugated plate ceramic packing has a great number of advantages such as high-efficiency, large thruput, low liquid holdup, unsharp amplification and good operability.   Advantages: The most economical range is F-factor1.5-2 Pressure drop of each theoretical sheet is 0.3-1mbar Minimum liquid load is 2001/m2h A distributor should be installed for every 3-4 meters inside packing towers with diameters of more than 300mm . Applications: Fining process of corrosive mixtures, which have strict requirements for pressure drop and number of theoretical sheets. Vacuum treatment under absolute pressure higher than1mbar. Fining and distillation of halogen organic compounds. Main Products Specification:   100X 125X 160X 250X 350X 450X 500X 700X 100Y 125Y 160Y 250Y 350Y 450Y 500Y 700Y Tips: 　 X = 30°,Y = 45°(Corrugated Angel of Inclination) The number front of X/Y means this packing’ specific surface area （ m2/m3 ） Chemical Composition SiO 2 Al 2 O 3 Fe 2 O 3 CaO MgO Other ≥72% ≥23% ≤0.5% ≤1.0% ≤0.1% ≤2% Physical Property Specific weight Water absorption A cid resistance Operation Temperature Compression Strength Mohs hardness Max ignition lost 2 ． 5 g /cm 3 ≤ 0.5% ＞ 99.5% ≤ 1000 ℃ ≥ 130MPa ≥ 7 ≤ 5.0% Major Technical Parameters Type Specific surface area Corrugated plate thickness Heaping weight Void volume Pressure drop Theoretical pieces Liquid load Max. Factorm/s Unit m2/m3 mm kg/ m3 % mmHg/m /m m3/m2h (Kg/m3)-1 125Y 125 2.5±0.5 330 85 1.8 1-1.5 0.2-100 3.0 250Y 250 1.4±0.5 420 80 2 2.5 0.2-100 2.6 350Y 350 1.2±0.5 470