Sell Marine Plywood

Dear sir,

  Thanks for your reading!

We main supply the products of plywood, film faced plywood, marine plywood, block board, MDF.

The plywood:

Core: using poplar, combined, hardwood, Birch, pine etc. Face/back: Okume, Bintangor, poplar, birch, pine etc; the grade: A-F grade. Glue: MR, WBP and Melamine. Thickness: from 2.5 -40mm

The marine plywood:

Face/Back: 1.0mm and 1.2mm thickness of Okume . Glue: Dynea phnolic glue, for 72 boiling easily; Core: imported okoume veneer. Thickness: from 4 -25mm

The film faced plywood:

The thickness is from 4 -40MM . Glue:MR, WBP and Melamine. Film: black film, brown film, Dynea film, yellow film etc. Core: poplar, birch, hardwood and other combined core.

   1, Black film, poplar core                        

   Glue: MR, WBP; Surface: black film, 240g /m2; Core: poplar; MC: 8-14%.

   2, imported film                                       

    Thickness: 8 -40MM ; Glue: WBP; Surface: imported film, 120g /m2; Core: poplar, birch; MC: 8-14%.

   3, anti-slip film-faced plywood                                 

    Thickness: 8 -40MM ; Glue: WBP; Surface: imported film, 165g /m2; Core: poplar, birch; MC: 8-14%.

   Size tolerance:                                           

   Length: +/ -3MM ; Width +/ -3MM ; Thickness: +/-0.2 -0.6MM ; Diagonal: 3MM ; Frequency of use: 20-50 times; Compared with iron moulds: reused and constancy; Straightness: 0.8MM /M.

If you are interesting to us or need some products, please contact me! Thank you!

ATTA:Rick