Sell 2.3mbps,2-wire,ethernet Lan Bridge(mdsl-t)

2.3Mbps,2-Wire,ethernet lan Bridge (MDSL-T)

Features

2-wire 2.3Mbps MSDSL modem The distance can be reached 3.29km in 24AWG(0.5mm) corresponding line and 2.51km in 26AWG(0.4mm) corresponding line 
Use the technology of MSDSL multi rates digital consumer line, expand the range of transmitting data In 24AWG(0.5mm)line, the longest transmitting distance is 6.25km. 
Support 8 kind of speed rates from 256K to 2320K

Can connect two LANs by a pair of twisted-pair to extend distance of LANs.
10/100BaseT(UTP)LAN interface, and be self-adapting 
According with IEE802.3 / IEE802.3u / Ethernet 
It can store up to 1024 MAC subnet address.

Learn automatically MAC address in the connected LAN and only transmit the aim address to frame in another LAN.

Lower cost, simple manipulation, conveniently using, need not any software setting up
There are many indicator LEDs on the panel to display work state and line status of equipment
Independent machine have two power supplying modes: 220V AC and -48V DC.

Specifications:

LAN :

Standard : according with IEE802.3/Ethernet

Work mode: full duplex/ half duplex

Data rate : 10/100Mbps ;self-adaptively

Physical interface: 10 /100BaseT(UTP);shielded RJ-45

Ethernet

LAN Table: 1024, learning automatically and refreshing automatically

WAN(E1/G.703)

Data rate: 256kbps 384kbps 1024kbps 1280kbps 1536kbps 2048kbps 2320kbps

Transmission mode: synchronous full duplex; HDLC high-degree data link

Line interface: impedance 135ohm, physical interface RJ45, with pin 4 and pin 5 (middle 2 lines)

Power supply: 20V +/- 10%,50Hz;48VDC(optional) 

Power consumption: 5W

Volume: 245mm*215mm*50mm;

2.3Mbps,2-Wire,ethernet lan Bridge

2.3Mbps,2-Wire,ethernet lan Bridge

2.3Mbps,2-Wire,ethernet lan Bridge

2.3Mbps,2-Wire,ethernet lan Bridge

2.3Mbps,2-Wire,ethernet lan Bridge

2.3Mbps,2-Wire,ethernet lan Bridge