Sell Solar Grid Tie Inverter

1. 10% More Power Output. It is well known by PV veterans that a parallel layout of solar modules can improve energy yields by as much as 10%. In a series configuration, all modules in a string will perform to the level of the poorest performing module. In fact, since the cells of modules are typically arranged in series, the entire string of modules will perform to the poorest performing cell. 2. Our inverter is controlled by Pulse Step Technology, which enables full power operation up to 50 degree without De-Rating. This is patented. Many inverters available in the market today is controlled by PWM(Pulse Width Modulated) technology. Whose power output is De-Rated at temperatures as low as 27 degree. 3. Low voltage, parallel configuration with Sungery 5 provides dramatically improved immunity to shading. This means more output and increased earnings under less than optimal conditions. Studies all conclude that the ideal system solution for BIPV is to arrange all the modules in low voltage, parallel configuration. High voltage system are susceptible to array shading that severely limits the output of a solar array. Using parallel configuration with the Sunergy 5 low voltage inverter, only one of the four circuits is lost when a panel is shaded as show. Inverter can still output 75% of peak power. It still operate in optimal voltage range despite shading. Modules wired in series are all limited by a shaded module. A high voltage series string with more than 3 modules shaded will cause the inverter to shutdown and power output will drop to zero. Shading losses can substantially effect the economics of the solar array. 4. The Sunergy 5 has inherent safety advantages due to the lower voltage operation. The Sunergy 5 low voltage inverter allows system installer to match effectively with any PV module. Low voltage means system installation and maintenance are easier and safer.