Sell Imax B5 Balance Charger(carton Pack)

* Operating voltage range: 10.0-18.0 Volt * Circuit Power: MAX 50W * Charge current range: 0.1-5.0A * Current drain for balacing Li-po: 200mA/cell * NiCd/NiMh: 1-14 cell * Li-ion/Polymer: 1-5 series * Pb battery voltage: 6V or 12V * Weight: 280 g * Dimension: 130mm x 80mm x 23mm * LCD Display * Microprocessor controlled high-performance Rapid charger for NiCd/NiMH/Li-polymer/Li-ion/Pb batteries * Data store and load in B5 * Load polarity, short protection, and input polarity protection * Sturdy aluminum casing for maximum heat dissipation * Voltage balancer for Li-polymer battery inside B5 has an individual-cell-voltage balancer inside. So it does not need any balancer separately when charging Lipo battery for cell balancing. * Delta-peak sensitivity The automatic charge termination program works on the principle of the Delta-peak voltage detection. * Capacity limit The charging capacity always calculated by multiple of the charging current and time. If the charging capacity exceeds the limit the process will be terminated automatically when you set the maximum value. * Input power monitor To protect the car battery using as input power from being damaged the voltage of it always monitored. If it drops below the lower limit the process will be ended automatically. * High-power and high-performance circuit B5 employs the circuit that has maximum output power of 50w. As a result it can charge up to 14 cells of Nicd/NiMH and 5 series of Li-poly batteries with maximum current of 5.0A