Supply Dreambox Satellite Receiver-dreambox 7020si

DREAMBOX DM-7020si This is truly the future of satellite viewing. The DM7020-S is a digital satellite receiver with full Ethernet communication capabilities. Power PC driven with Linux operating system for endless possibilities. This Dreambox 7020 Si digital satellite receiver with full Ethernet communication capabilities. Power PC driven with Linux operating system for endless possibilities, 250 MHz PowerPC Processor(350 Mips). - 250 MHz PowerPC Processor(350 Mips) - Linux open source (most parts under the terms of GPL) - Supports Linux Standard API (Direct-FB, Linux-FB, LIRC) - 1 x DVB Common-Interface Slot - 2 x Smartcard-Reader - Integrated Compact Flash Interface Slot - MPEG2 Hardware decoding (fully DVB compliant) - Common NIM DVB-S - 10/100 MBit compatible Ethernet Interface - modem - USB Port - 12V switch cinch - V.24/RS232 Interface - Big-size LC-Display - 32 MByte Flash - 96 MByte RAM - integrated IDE UDMA66 Interface - Support for internal HDD in any capacity - unlimited channel lists for TV/Radio - channel-change time < 1 second - full automatic service scan - supports directly bouquet-lists - supports EPG (electronic program guide)’ - supports own videotext - supports multiple LNB-Switching control (supports DiSEqC) - fully adaptable OSD in many languages and skin-support - S/PDIF Interface for digital bit stream out (AC-3) - 2 x Scart-interfaces - RF modulator - Audio/Video cinch out - MINI-DIN connector for extern IR (send) DreamBox DM7020 technical data DBS-Tuner: Frequency Range 950 . 2150 MHz Signal Level - 65 dBm . - 25 dBm Signal-to-Noise Level 12 dB max. DBS-Tuner Input Connector F-Type female Input Impedance 75 Ohm AFC +/- 3 MHz Demodulation Shaped QPSK FEC Viterbi and Reed-Solomon Viterbirate 1/2, 2/3, 3/4, 5/6, 7/8 Roll-off Factor 35 % Demultiplexing according ISO 13818-1 Common-Interface: Common-Interface Power Consumption max. 0,3A/5V Video decoder: Video Compression MPEG-2 and MPEG-1 compatible Video Standard PAL G/ 25 Hz Video Formats 4:3 / 16:9 Letterbox for 4:3 TV-Device Audio decoder: Audiokompression MPEG-1 ∓ MPEG-2 Layer I and II Audio Mode Dual (main/sub), Stereo Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz Output analog: Output Level L/R 0,5 Vss on 600 Ohm THD > 60 dB (1 kHz) Crosstalk < -65 dB Output digital: Output Level 0,5 Vss on 75 Ohm Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz S/PDIF-Output optical (AC3) Video parameter: Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm Teletext filter in conformity with ETS 300 472 Standard> TV-Scart: Output: FBAS, RGB, S-Video over OSD selectable VCR-Scart: FBAS Serielle Interface RS 232: Typ RS232 bidirectional Bitrate 115,2 kBit/s max. Plug Connector SUB-D-9 Function: Update of Firmware Ethernet: 10/100 MBit compatible interface Function Update of Firmware USB: USB 1.2 connector Mini DIN: I2C for steering of external devices IR funktion Pins: 1 5V 2 SDA (I2C-Kanal 2) 3 SCL 4 3,3V 7 GND 8 IR-Output 9 GND UDMA66 IDE Interface: Intern for connect HDD Compact Flash - Reader LNB power and polarisation: LNB Current 500mA max. ; short-circuit-protected LNB Voltage vertical < 14V no load, > 11,5V at 400mA LNB Voltage horizontal < 20V no load, > 17,3V at 400mA LNB shut-off at Standby-Mode Count of active satellite position: DiSEqC 1.0/1.2 SAT POSITION / SAT OPTION DiSEqC - Rotor Control Power consumption: < 20W (in operation, horizontal polarization / 400mA LNB current) < 11W (in operation, no LNB) < 4W (Deep-Standby-Mode) Input voltage: 230V / 50 Hz alternating current +/- 15% Physical specification: Ambient Temperature +15°C...+35°C Humidity < 80% Size (W x D x H): 374 mm x 230 mm x 75 mm Weight: 1.8 kg without HDD