Com Kkl Vag-com 409.1

ntroduction:

This diagnostic cable is usable for ISO9141 and KWP2000 transmission protocol like used for example by:
* Volkswagen
*  Audi
* Skoda
* Seat
 
Reference Data
* This cable can not work if your car uses a protocol/bussystem like VPW, PWM or CAN-bus
* Terminal K = Bus of communication
* Terminal L = Ignition for waking up car computing system (ECU: Engine Control Unit)
* Existed 3 different protocols with same OBD2 connector incl. ISO/KWP, VPW, PMW
* K/L Diagnostic interface & cables work on ISO/KWP (Key Word Protocol) launched after 1996 only
* Supported also ISO9141 protocol
* The Cables may work with some versions of the Carsoft, but carsoft used a lot of different interfaces during the different versions and also had some custom interfaces

VAG-COM shareware download:
* http://www.ross-tech.com/vag-com/download/ Applications of the VAG-COM:
* http://www.ross-tech.com/vag-com/download/
* Read & erase error code, log data e.g., speed, gasoline-consume, engine-rotating (RPM: Rotation Per Minutes)